Various enhancements, fixes, and tweaks focused on improving the inspector (#34)

* Added Dynamic Gravity Toggle

Added an editor toggle for dynamic gravity so users don't need to uncomment code in character.gd.

* Refactor controls export variables

Changed controls export variables to be a single dictionary so they can be edited completely in the editor without having to open the script. I also refactored the controller support section to allow similar functionality for controller specific controls and removed the need to uncomment/comment out lines of code to turn on/off controller support.

* Add more editor descriptions and implement camera axis inversion options

Added/tweaked export variable descriptions so everything has one. Also slightly refactored the camera input inversion code and added the ability to invert the camera x axis.

* Added direction based landing animations

Added some logic to determine which landing animation to play so it's not random anymore. Also added a land_center animation for the case of neutral landings. This can be expanded if desired, but it's pretty convincing as is and is ulitmately a small detail.

* Correct various grammar and spelling errors

A final pass to clean up any grammatical or spelling errors in the comments

* Re-organized Character.gd

Hope I'm not overstepping here, but I re-organized Character.gd to make it a bit easier to read and work with. Added editor bookmarks and collapsible code regions. It's hard to parse in the diff so I recommend you look at it in Godot proper.

* Commented out debug print statement

I assume this was left uncommented by mistake. I was wondering what was printing that to my console.

* Fixed Landing Animation Logic

I guess I was up too late on my first attempt because it straight up didn't work. This new version works as far as my testing can tell.

* Removed some unused variables

README.md

@@ -33,9 +33,13 @@ You can make this a super basic controller by just disabling everything.
 - In the controls export group, there is a commented section at the end that says "Uncomment this if you want full controller support". Uncomment that block.
 - Make a key map for each direction (left, right, up, down) and map them to your joystick.
 - Write in these keymaps in the controls section of the player settings.
-- In the `_process` function, there is another block of commented code at the end that says the same thing. Uncomment that too.
+- In the `handle_head_rotation` function, there is another block of commented code that says the same thing. Uncomment that too.
 - You should now be able to look around with the joystick. Make sure you add the other controls to the input map. (movement, jumping, crouching, sprinting, etc.)
 
+**Slope/staircase:**   
+Credit to @roberto-urbani23  
+In the character inspector, you can uncheck Stop on Slope and set the max angle to 89 (for some reason, 90 will make the player stuck). Also Snap Length to 1 otherwise your character will not remain attached to stairs if you sprint while going downstairs.
+
 **How to change settings:**  
 Click on the character node and there should be settings in the "Feature Settings" group.
 

addons/fpc/EditorModule.gd

@@ -1,39 +1,40 @@
 @tool
 extends Node
 
-# This module affects runtime nad 
+# This does not effect runtime yet but will in the future.
 
-
-#TODO: Add descriptions
 @export_category("Controller Editor Module")
-@export var head_y_rotation : float = 0:
+@export_range(-360.0, 360.0, 0.01, "or_greater", "or_less") var head_y_rotation : float = 0.0:
 	set(new_rotation):
+		if HEAD:
 			head_y_rotation = new_rotation
-		HEAD.rotation.y = head_y_rotation
+			HEAD.rotation.y = deg_to_rad(head_y_rotation)
+			update_configuration_warnings()
+@export_range(-90.0, 90.0, 0.01, "or_greater", "or_less") var head_x_rotation : float = 0.0:
+	set(new_rotation):
+		if HEAD:
+			head_x_rotation = new_rotation
+			HEAD.rotation.x = deg_to_rad(head_x_rotation)
 			update_configuration_warnings()
 
 @export_group("Nodes")
 @export var CHARACTER : CharacterBody3D
-@export var head_path : String = "Head" # From this nodes parent node
+@export var head_path : String = "Head" # Relative to the parent node
 #@export var CAMERA : Camera3D
 #@export var HEADBOB_ANIMATION : AnimationPlayer
 #@export var JUMP_ANIMATION : AnimationPlayer
 #@export var CROUCH_ANIMATION : AnimationPlayer
 #@export var COLLISION_MESH : CollisionShape3D
 
-var HEAD
+@onready var HEAD = get_node("../" + head_path)
 
 
 func _ready():
-	HEAD = get_node("../" + head_path)
-	if Engine.is_editor_hint():
-		pass
-	else:
-		HEAD.rotation.y = head_y_rotation
+	if !Engine.is_editor_hint():
+		#print("not editor")
+		HEAD.rotation.y = deg_to_rad(head_y_rotation)
+		HEAD.rotation.x = deg_to_rad(head_x_rotation)
 
-func _process(delta):
-	if Engine.is_editor_hint():
-		pass
 
 func _get_configuration_warnings():
 	var warnings = []
@@ -41,8 +42,8 @@ func _get_configuration_warnings():
 	if head_y_rotation > 360:
 		warnings.append("The head rotation is greater than 360")
 	
-	if head_y_rotation < 0:
-		warnings.append("The head rotation is less than 0")
+	if head_y_rotation < -360:
+		warnings.append("The head rotation is less than -360")
 
 	# Returning an empty array gives no warnings
 	return warnings

addons/fpc/character.gd

@@ -1,72 +1,129 @@
-
 # COPYRIGHT Colormatic Studios
-# MIT licence
+# MIT license
 # Quality Godot First Person Controller v2
 
 
 extends CharacterBody3D
 
-# TODO: Add descriptions for each value
 
+#region Character Export Group
 
+## The settings for the character's movement and feel.
 @export_category("Character")
+## The speed that the character moves at without crouching or sprinting.
 @export var base_speed : float = 3.0
+## The speed that the character moves at when sprinting.
 @export var sprint_speed : float = 6.0
+## The speed that the character moves at when crouching.
 @export var crouch_speed : float = 1.0
 
+## How fast the character speeds up and slows down when Motion Smoothing is on.
 @export var acceleration : float = 10.0
+## How high the player jumps.
 @export var jump_velocity : float = 4.5
+## How far the player turns when the mouse is moved.
 @export var mouse_sensitivity : float = 0.1
+## Invert the X axis input for the camera.
+@export var invert_camera_x_axis : bool = false
+## Invert the Y axis input for the camera.
+@export var invert_camera_y_axis : bool = false
+## Whether the player can use movement inputs. Does not stop outside forces or jumping. See Jumping Enabled.
 @export var immobile : bool = false
+## The reticle file to import at runtime. By default are in res://addons/fpc/reticles/. Set to an empty string to remove.
 @export_file var default_reticle
 
+#endregion
+
+#region Nodes Export Group
+
 @export_group("Nodes")
+## A reference to the camera for use in the character script. This is the parent node to the camera and is rotated instead of the camera for mouse input.
 @export var HEAD : Node3D
+## A reference to the camera for use in the character script.
 @export var CAMERA : Camera3D
+## A reference to the headbob animation for use in the character script.
 @export var HEADBOB_ANIMATION : AnimationPlayer
+## A reference to the jump animation for use in the character script.
 @export var JUMP_ANIMATION : AnimationPlayer
+## A reference to the crouch animation for use in the character script.
 @export var CROUCH_ANIMATION : AnimationPlayer
+## A reference to the the player's collision shape for use in the character script.
 @export var COLLISION_MESH : CollisionShape3D
 
-@export_group("Controls")
-# We are using UI controls because they are built into Godot Engine so they can be used right away
-@export var JUMP : String = "ui_accept"
-@export var LEFT : String = "ui_left"
-@export var RIGHT : String = "ui_right"
-@export var FORWARD : String = "ui_up"
-@export var BACKWARD : String = "ui_down"
-@export var PAUSE : String = "ui_cancel"
-@export var CROUCH : String
-@export var SPRINT : String
+#endregion
 
-# Uncomment if you want full controller support
-#@export var LOOK_LEFT : String
-#@export var LOOK_RIGHT : String
-#@export var LOOK_UP : String
-#@export var LOOK_DOWN : String
+#region Controls Export Group
+
+# We are using UI controls because they are built into Godot Engine so they can be used right away
+@export_group("Controls")
+## Use the Input Map to map a mouse/keyboard input to an action and add a reference to it to this dictionary to be used in the script.
+@export var controls : Dictionary = {
+	LEFT = "ui_left",
+	RIGHT = "ui_right",
+	FORWARD = "ui_up",
+	BACKWARD = "ui_down",
+	JUMP = "ui_accept",
+	CROUCH = "crouch",
+	SPRINT = "sprint",
+	PAUSE = "ui_cancel"
+	}
+@export_subgroup("Controller Specific")
+## This only affects how the camera is handled, the rest should be covered by adding controller inputs to the existing actions in the Input Map.
+@export var controller_support : bool = false
+## Use the Input Map to map a controller input to an action and add a reference to it to this dictionary to be used in the script.
+@export var controller_controls : Dictionary = {
+	LOOK_LEFT = "look_left",
+	LOOK_RIGHT = "look_right",
+	LOOK_UP = "look_up",
+	LOOK_DOWN = "look_down"
+	}
+## The sensitivity of the analog stick that controls camera rotation. Lower is less sensitive and higher is more sensitive.
+@export_range(0.001, 1, 0.001) var look_sensitivity : float = 0.035
+
+#endregion
+
+#region Feature Settings Export Group
 
 @export_group("Feature Settings")
+## Enable or disable jumping. Useful for restrictive storytelling environments.
 @export var jumping_enabled : bool = true
+## Whether the player can move in the air or not.
 @export var in_air_momentum : bool = true
+## Smooths the feel of walking.
 @export var motion_smoothing : bool = true
+## Enables or disables sprinting.
 @export var sprint_enabled : bool = true
-@export var crouch_enabled : bool = true
-@export_enum("Hold to Crouch", "Toggle Crouch") var crouch_mode : int = 0
+## Toggles the sprinting state when button is pressed or requires the player to hold the button down to remain sprinting.
 @export_enum("Hold to Sprint", "Toggle Sprint") var sprint_mode : int = 0
+## Enables or disables crouching.
+@export var crouch_enabled : bool = true
+## Toggles the crouch state when button is pressed or requires the player to hold the button down to remain crouched.
+@export_enum("Hold to Crouch", "Toggle Crouch") var crouch_mode : int = 0
+## Wether sprinting should effect FOV.
 @export var dynamic_fov : bool = true
+## If the player holds down the jump button, should the player keep hopping.
 @export var continuous_jumping : bool = true
+## Enables the view bobbing animation.
 @export var view_bobbing : bool = true
+## Enables an immersive animation when the player jumps and hits the ground.
 @export var jump_animation : bool = true
+## This determines wether the player can use the pause button, not wether the game will actually pause.
 @export var pausing_enabled : bool = true
+## Use with caution.
 @export var gravity_enabled : bool = true
+## If your game changes the gravity value during gameplay, check this property to allow the player to experience the change in gravity.
+@export var dynamic_gravity : bool = false
 
+#endregion
 
-# Member variables
+#region Member Variable Initialization
+
+# These are variables used in this script that don't need to be exposed in the editor.
 var speed : float = base_speed
 var current_speed : float = 0.0
 # States: normal, crouching, sprinting
 var state : String = "normal"
-var low_ceiling : bool = false # This is for when the cieling is too low and the player needs to crouch.
+var low_ceiling : bool = false # This is for when the ceiling is too low and the player needs to crouch.
 var was_on_floor : bool = true # Was the player on the floor last frame (for landing animation)
 
 # The reticle should always have a Control node as the root
@@ -75,6 +132,14 @@ var RETICLE : Control
 # Get the gravity from the project settings to be synced with RigidBody nodes
 var gravity : float = ProjectSettings.get_setting("physics/3d/default_gravity") # Don't set this as a const, see the gravity section in _physics_process
 
+# Stores mouse input for rotating the camera in the physics process
+var mouseInput : Vector2 = Vector2(0,0)
+
+#endregion
+
+
+
+#region Main Control Flow
 
 func _ready():
 	#It is safe to comment this line if your game doesn't start with the mouse captured
@@ -87,76 +152,36 @@ func _ready():
 	if default_reticle:
 		change_reticle(default_reticle)
 
-	# Reset the camera position
-	# If you want to change the default head height, change these animations.
-	HEADBOB_ANIMATION.play("RESET")
-	JUMP_ANIMATION.play("RESET")
-	CROUCH_ANIMATION.play("RESET")
-	
+	initialize_animations()
 	check_controls()
-
-func check_controls(): # If you add a control, you might want to add a check for it here.
-	if !InputMap.has_action(JUMP):
-		push_error("No control mapped for jumping. Please add an input map control. Disabling jump.")
-		jumping_enabled = false
-	if !InputMap.has_action(LEFT):
-		push_error("No control mapped for move left. Please add an input map control. Disabling movement.")
-		immobile = true
-	if !InputMap.has_action(RIGHT):
-		push_error("No control mapped for move right. Please add an input map control. Disabling movement.")
-		immobile = true
-	if !InputMap.has_action(FORWARD):
-		push_error("No control mapped for move forward. Please add an input map control. Disabling movement.")
-		immobile = true
-	if !InputMap.has_action(BACKWARD):
-		push_error("No control mapped for move backward. Please add an input map control. Disabling movement.")
-		immobile = true
-	if !InputMap.has_action(PAUSE):
-		push_error("No control mapped for move pause. Please add an input map control. Disabling pausing.")
-		pausing_enabled = false
-	if !InputMap.has_action(CROUCH):
-		push_error("No control mapped for crouch. Please add an input map control. Disabling crouching.")
-		crouch_enabled = false
-	if !InputMap.has_action(SPRINT):
-		push_error("No control mapped for sprint. Please add an input map control. Disabling sprinting.")
-		sprint_enabled = false
+	enter_normal_state()
 
 
-func change_reticle(reticle): # Yup, this function is kinda strange
-	if RETICLE:
-		RETICLE.queue_free()
+func _process(_delta):
+	if pausing_enabled:
+		handle_pausing()
 
-	RETICLE = load(reticle).instantiate()
-	RETICLE.character = self
-	$UserInterface.add_child(RETICLE)
+	update_debug_menu_per_frame()
 
 
-func _physics_process(delta):
-	# Big thanks to github.com/LorenzoAncora for the concept of the improved debug values
-	current_speed = Vector3.ZERO.distance_to(get_real_velocity())
-	$UserInterface/DebugPanel.add_property("Speed", snappedf(current_speed, 0.001), 1)
-	$UserInterface/DebugPanel.add_property("Target speed", speed, 2)
-	var cv : Vector3 = get_real_velocity()
-	var vd : Array[float] = [
-		snappedf(cv.x, 0.001),
-		snappedf(cv.y, 0.001),
-		snappedf(cv.z, 0.001)
-	]
-	var readable_velocity : String = "X: " + str(vd[0]) + " Y: " + str(vd[1]) + " Z: " + str(vd[2])
-	$UserInterface/DebugPanel.add_property("Velocity", readable_velocity, 3)
-	
+func _physics_process(delta): # Most things happen here.
 	# Gravity
-	#gravity = ProjectSettings.get_setting("physics/3d/default_gravity") # If the gravity changes during your game, uncomment this code
+	if dynamic_gravity:
+		gravity = ProjectSettings.get_setting("physics/3d/default_gravity")
 	if not is_on_floor() and gravity and gravity_enabled:
 		velocity.y -= gravity * delta
 
 	handle_jumping()
 
 	var input_dir = Vector2.ZERO
-	if !immobile: # Immobility works by interrupting user input, so other forces can still be applied to the player
-		input_dir = Input.get_vector(LEFT, RIGHT, FORWARD, BACKWARD)
+
+	if not immobile: # Immobility works by interrupting user input, so other forces can still be applied to the player
+		input_dir = Input.get_vector(controls.LEFT, controls.RIGHT, controls.FORWARD, controls.BACKWARD)
+
 	handle_movement(delta, input_dir)
 
+	handle_head_rotation()
+
 	# The player is not able to stand up if the ceiling is too low
 	low_ceiling = $CrouchCeilingDetection.is_colliding()
 
@@ -165,28 +190,28 @@ func _physics_process(delta):
 		update_camera_fov()
 
 	if view_bobbing:
-		headbob_animation(input_dir)
+		play_headbob_animation(input_dir)
 
 	if jump_animation:
-		if !was_on_floor and is_on_floor(): # The player just landed
-			match randi() % 2: #TODO: Change this to detecting velocity direction
-				0:
-					JUMP_ANIMATION.play("land_left", 0.25)
-				1:
-					JUMP_ANIMATION.play("land_right", 0.25)
+		play_jump_animation()
+
+	update_debug_menu_per_tick()
 
 	was_on_floor = is_on_floor() # This must always be at the end of physics_process
 
+#endregion
+
+#region Input Handling
 
 func handle_jumping():
 	if jumping_enabled:
 		if continuous_jumping: # Hold down the jump button
-			if Input.is_action_pressed(JUMP) and is_on_floor() and !low_ceiling:
+			if Input.is_action_pressed(controls.JUMP) and is_on_floor() and !low_ceiling:
 				if jump_animation:
 					JUMP_ANIMATION.play("jump", 0.25)
 				velocity.y += jump_velocity # Adding instead of setting so jumping on slopes works properly
 		else:
-			if Input.is_action_just_pressed(JUMP) and is_on_floor() and !low_ceiling:
+			if Input.is_action_just_pressed(controls.JUMP) and is_on_floor() and !low_ceiling:
 				if jump_animation:
 					JUMP_ANIMATION.play("jump", 0.25)
 				velocity.y += jump_velocity
@@ -214,10 +239,68 @@ func handle_movement(delta, input_dir):
 			velocity.z = direction.z * speed
 
 
+func handle_head_rotation():
+	if invert_camera_x_axis:
+		HEAD.rotation_degrees.y -= mouseInput.x * mouse_sensitivity * -1
+	else:
+		HEAD.rotation_degrees.y -= mouseInput.x * mouse_sensitivity
+
+	if invert_camera_y_axis:
+		HEAD.rotation_degrees.x -= mouseInput.y * mouse_sensitivity * -1
+	else:
+		HEAD.rotation_degrees.x -= mouseInput.y * mouse_sensitivity
+
+	if controller_support:
+		var controller_view_rotation = Input.get_vector(controller_controls.LOOK_DOWN, controller_controls.LOOK_UP, controller_controls.LOOK_RIGHT, controller_controls.LOOK_LEFT) * look_sensitivity # These are inverted because of the nature of 3D rotation.
+		if invert_camera_x_axis:
+			HEAD.rotation.x += controller_view_rotation.x * -1
+		else:
+			HEAD.rotation.x += controller_view_rotation.x
+
+		if invert_camera_y_axis:
+			HEAD.rotation.y += controller_view_rotation.y * -1
+		else:
+			HEAD.rotation.y += controller_view_rotation.y
+
+	mouseInput = Vector2(0,0)
+	HEAD.rotation.x = clamp(HEAD.rotation.x, deg_to_rad(-90), deg_to_rad(90))
+
+
+func check_controls(): # If you add a control, you might want to add a check for it here.
+	# The actions are being disabled so the engine doesn't halt the entire project in debug mode
+	if !InputMap.has_action(controls.JUMP):
+		push_error("No control mapped for jumping. Please add an input map control. Disabling jump.")
+		jumping_enabled = false
+	if !InputMap.has_action(controls.LEFT):
+		push_error("No control mapped for move left. Please add an input map control. Disabling movement.")
+		immobile = true
+	if !InputMap.has_action(controls.RIGHT):
+		push_error("No control mapped for move right. Please add an input map control. Disabling movement.")
+		immobile = true
+	if !InputMap.has_action(controls.FORWARD):
+		push_error("No control mapped for move forward. Please add an input map control. Disabling movement.")
+		immobile = true
+	if !InputMap.has_action(controls.BACKWARD):
+		push_error("No control mapped for move backward. Please add an input map control. Disabling movement.")
+		immobile = true
+	if !InputMap.has_action(controls.PAUSE):
+		push_error("No control mapped for pause. Please add an input map control. Disabling pausing.")
+		pausing_enabled = false
+	if !InputMap.has_action(controls.CROUCH):
+		push_error("No control mapped for crouch. Please add an input map control. Disabling crouching.")
+		crouch_enabled = false
+	if !InputMap.has_action(controls.SPRINT):
+		push_error("No control mapped for sprint. Please add an input map control. Disabling sprinting.")
+		sprint_enabled = false
+
+#endregion
+
+#region State Handling
+
 func handle_state(moving):
 	if sprint_enabled:
 		if sprint_mode == 0:
-			if Input.is_action_pressed(SPRINT) and state != "crouching":
+			if Input.is_action_pressed(controls.SPRINT) and state != "crouching":
 				if moving:
 					if state != "sprinting":
 						enter_sprint_state()
@@ -228,10 +311,10 @@ func handle_state(moving):
 				enter_normal_state()
 		elif sprint_mode == 1:
 			if moving:
-				# If the player is holding sprint before moving, handle that cenerio
-				if Input.is_action_pressed(SPRINT) and state == "normal":
+				# If the player is holding sprint before moving, handle that scenario
+				if Input.is_action_pressed(controls.SPRINT) and state == "normal":
 					enter_sprint_state()
-				if Input.is_action_just_pressed(SPRINT):
+				if Input.is_action_just_pressed(controls.SPRINT):
 					match state:
 						"normal":
 							enter_sprint_state()
@@ -242,13 +325,13 @@ func handle_state(moving):
 
 	if crouch_enabled:
 		if crouch_mode == 0:
-			if Input.is_action_pressed(CROUCH) and state != "sprinting":
+			if Input.is_action_pressed(controls.CROUCH) and state != "sprinting":
 				if state != "crouching":
 					enter_crouch_state()
 			elif state == "crouching" and !$CrouchCeilingDetection.is_colliding():
 				enter_normal_state()
 		elif crouch_mode == 1:
-			if Input.is_action_just_pressed(CROUCH):
+			if Input.is_action_just_pressed(controls.CROUCH):
 				match state:
 					"normal":
 						enter_crouch_state()
@@ -258,7 +341,6 @@ func handle_state(moving):
 
 
 # Any enter state function should only be called once when you want to enter that state, not every frame.
-
 func enter_normal_state():
 	#print("entering normal state")
 	var prev_state = state
@@ -269,7 +351,6 @@ func enter_normal_state():
 
 func enter_crouch_state():
 	#print("entering crouch state")
-	var prev_state = state
 	state = "crouching"
 	speed = crouch_speed
 	CROUCH_ANIMATION.play("crouch")
@@ -282,15 +363,18 @@ func enter_sprint_state():
 	state = "sprinting"
 	speed = sprint_speed
 
+#endregion
 
-func update_camera_fov():
-	if state == "sprinting":
-		CAMERA.fov = lerp(CAMERA.fov, 85.0, 0.3)
-	else:
-		CAMERA.fov = lerp(CAMERA.fov, 75.0, 0.3)
+#region Animation Handling
 
+func initialize_animations():
+	# Reset the camera position
+	# If you want to change the default head height, change these animations.
+	HEADBOB_ANIMATION.play("RESET")
+	JUMP_ANIMATION.play("RESET")
+	CROUCH_ANIMATION.play("RESET")
 
-func headbob_animation(moving):
+func play_headbob_animation(moving):
 	if moving and is_on_floor():
 		var use_headbob_animation : String
 		match state:
@@ -313,36 +397,92 @@ func headbob_animation(moving):
 			# This code is extremely performant but it makes no sense.
 
 	else:
-		if HEADBOB_ANIMATION.is_playing():
-			HEADBOB_ANIMATION.play("RESET", 0.25)
+		if HEADBOB_ANIMATION.current_animation == "sprint" or HEADBOB_ANIMATION.current_animation == "walk":
 			HEADBOB_ANIMATION.speed_scale = 1
+			HEADBOB_ANIMATION.play("RESET", 1)
 
+func play_jump_animation():
+	if !was_on_floor and is_on_floor(): # The player just landed
+		var facing_direction : Vector3 = CAMERA.get_global_transform().basis.x
+		var facing_direction_2D : Vector2 = Vector2(facing_direction.x, facing_direction.z).normalized()
+		var velocity_2D : Vector2 = Vector2(velocity.x, velocity.z).normalized()
 
-func _process(delta):
+		# Compares velocity direction against the camera direction (via dot product) to determine which landing animation to play.
+		var side_landed : int = round(velocity_2D.dot(facing_direction_2D))
+
+		if side_landed > 0:
+			JUMP_ANIMATION.play("land_right", 0.25)
+		elif side_landed < 0:
+			JUMP_ANIMATION.play("land_left", 0.25)
+		else:
+			JUMP_ANIMATION.play("land_center", 0.25)
+
+#endregion
+
+#region Debug Menu
+
+func update_debug_menu_per_frame():
 	$UserInterface/DebugPanel.add_property("FPS", Performance.get_monitor(Performance.TIME_FPS), 0)
 	var status : String = state
 	if !is_on_floor():
 		status += " in the air"
 	$UserInterface/DebugPanel.add_property("State", status, 4)
 
-	if pausing_enabled:
-		if Input.is_action_just_pressed(PAUSE):
+
+func update_debug_menu_per_tick():
+	# Big thanks to github.com/LorenzoAncora for the concept of the improved debug values
+	current_speed = Vector3.ZERO.distance_to(get_real_velocity())
+	$UserInterface/DebugPanel.add_property("Speed", snappedf(current_speed, 0.001), 1)
+	$UserInterface/DebugPanel.add_property("Target speed", speed, 2)
+	var cv : Vector3 = get_real_velocity()
+	var vd : Array[float] = [
+		snappedf(cv.x, 0.001),
+		snappedf(cv.y, 0.001),
+		snappedf(cv.z, 0.001)
+	]
+	var readable_velocity : String = "X: " + str(vd[0]) + " Y: " + str(vd[1]) + " Z: " + str(vd[2])
+	$UserInterface/DebugPanel.add_property("Velocity", readable_velocity, 3)
+
+
+func _unhandled_input(event : InputEvent):
+	if event is InputEventMouseMotion and Input.mouse_mode == Input.MOUSE_MODE_CAPTURED:
+		mouseInput.x += event.relative.x
+		mouseInput.y += event.relative.y
+	# Toggle debug menu
+	elif event is InputEventKey:
+		if event.is_released():
+			# Where we're going, we don't need InputMap
+			if event.keycode == 4194338: # F7
+				$UserInterface/DebugPanel.visible = !$UserInterface/DebugPanel.visible
+
+#endregion
+
+#region Misc Functions
+
+func change_reticle(reticle): # Yup, this function is kinda strange
+	if RETICLE:
+		RETICLE.queue_free()
+
+	RETICLE = load(reticle).instantiate()
+	RETICLE.character = self
+	$UserInterface.add_child(RETICLE)
+
+
+func update_camera_fov():
+	if state == "sprinting":
+		CAMERA.fov = lerp(CAMERA.fov, 85.0, 0.3)
+	else:
+		CAMERA.fov = lerp(CAMERA.fov, 75.0, 0.3)
+
+func handle_pausing():
+	if Input.is_action_just_pressed(controls.PAUSE):
+		# You may want another node to handle pausing, because this player may get paused too.
 		match Input.mouse_mode:
 			Input.MOUSE_MODE_CAPTURED:
 				Input.mouse_mode = Input.MOUSE_MODE_VISIBLE
+				#get_tree().paused = false
 			Input.MOUSE_MODE_VISIBLE:
 				Input.mouse_mode = Input.MOUSE_MODE_CAPTURED
+				#get_tree().paused = false
 
-	
-	HEAD.rotation.x = clamp(HEAD.rotation.x, deg_to_rad(-90), deg_to_rad(90))
-	
-	# Uncomment if you want full controller support
-	#var controller_view_rotation = Input.get_vector(LOOK_LEFT, LOOK_RIGHT, LOOK_UP, LOOK_DOWN)
-	#HEAD.rotation_degrees.y -= controller_view_rotation.x * 1.5
-	#HEAD.rotation_degrees.x -= controller_view_rotation.y * 1.5
-
-
-func _unhandled_input(event):
-	if event is InputEventMouseMotion and Input.mouse_mode == Input.MOUSE_MODE_CAPTURED:
-		HEAD.rotation_degrees.y -= event.relative.x * mouse_sensitivity
-		HEAD.rotation_degrees.x -= event.relative.y * mouse_sensitivity
+#endregion

addons/fpc/character.tscn

@@ -1,4 +1,4 @@
-[gd_scene load_steps=21 format=3 uid="uid://cc1m2a1obsyn4"]
+[gd_scene load_steps=22 format=3 uid="uid://cc1m2a1obsyn4"]
 
 [ext_resource type="Script" path="res://addons/fpc/character.gd" id="1_0t4e8"]
 [ext_resource type="Script" path="res://addons/fpc/EditorModule.gd" id="3_v3ckk"]
@@ -174,17 +174,6 @@ tracks/1/keys = {
 "points": PackedFloat32Array(0, -0.25, 0, 0.25, 0),
 "times": PackedFloat32Array(0)
 }
-tracks/2/type = "bezier"
-tracks/2/imported = false
-tracks/2/enabled = true
-tracks/2/path = NodePath("Camera:position:z")
-tracks/2/interp = 1
-tracks/2/loop_wrap = true
-tracks/2/keys = {
-"handle_modes": PackedInt32Array(0),
-"points": PackedFloat32Array(0, -0.25, 0, 0.25, 0),
-"times": PackedFloat32Array(0)
-}
 
 [sub_resource type="Animation" id="Animation_8ku67"]
 resource_name = "sprint"
@@ -212,17 +201,6 @@ tracks/1/keys = {
 "points": PackedFloat32Array(0.05, -0.25, 0, 0.2, -0.01, 0, -0.2, 0.000186046, 0.2, 0.000186046, 0.05, -0.2, -0.01, 0.2, -0.01, 0, -0.2, 0, 0.2, 0, 0.05, -0.2, -0.01, 0.25, 0),
 "times": PackedFloat32Array(0, 0.5, 1, 1.5, 2)
 }
-tracks/2/type = "bezier"
-tracks/2/imported = false
-tracks/2/enabled = true
-tracks/2/path = NodePath("Camera:position:z")
-tracks/2/interp = 1
-tracks/2/loop_wrap = true
-tracks/2/keys = {
-"handle_modes": PackedInt32Array(0, 0, 0, 0, 0),
-"points": PackedFloat32Array(0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0),
-"times": PackedFloat32Array(0, 0.5, 1, 1.5, 2)
-}
 
 [sub_resource type="Animation" id="Animation_lrqmv"]
 resource_name = "walk"
@@ -250,17 +228,6 @@ tracks/1/keys = {
 "points": PackedFloat32Array(-0.05, -0.25, 0, 0.2, 0.005, 0, -0.2, 0.000186046, 0.2, 0.000186046, -0.05, -0.2, 0.005, 0.2, 0.005, 0, -0.2, 0, 0.2, 0, -0.05, -0.2, 0.005, 0.25, 0),
 "times": PackedFloat32Array(0, 0.5, 1, 1.5, 2)
 }
-tracks/2/type = "bezier"
-tracks/2/imported = false
-tracks/2/enabled = true
-tracks/2/path = NodePath("Camera:position:z")
-tracks/2/interp = 1
-tracks/2/loop_wrap = true
-tracks/2/keys = {
-"handle_modes": PackedInt32Array(0, 0, 0, 0, 0),
-"points": PackedFloat32Array(0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0, 0, -0.25, 0, 0.25, 0),
-"times": PackedFloat32Array(0, 0.5, 1, 1.5, 2)
-}
 
 [sub_resource type="AnimationLibrary" id="AnimationLibrary_o0unb"]
 _data = {
@@ -281,7 +248,7 @@ tracks/0/keys = {
 "times": PackedFloat32Array(0),
 "transitions": PackedFloat32Array(1),
 "update": 0,
-"values": [Vector3(0.0349066, 0, 0)]
+"values": [Vector3(0, 0, 0)]
 }
 tracks/1/type = "value"
 tracks/1/imported = false
@@ -368,10 +335,39 @@ tracks/1/keys = {
 "values": [Vector3(0, 0, 0), Vector3(0, -0.1, 0), Vector3(0, 0, 0)]
 }
 
+[sub_resource type="Animation" id="Animation_3eyjl"]
+resource_name = "land_center"
+length = 1.5
+tracks/0/type = "value"
+tracks/0/imported = false
+tracks/0/enabled = true
+tracks/0/path = NodePath("Camera:rotation")
+tracks/0/interp = 2
+tracks/0/loop_wrap = true
+tracks/0/keys = {
+"times": PackedFloat32Array(0, 0.5, 1.5),
+"transitions": PackedFloat32Array(1, 1, 1),
+"update": 0,
+"values": [Vector3(0, 0, 0), Vector3(-0.0349066, 0, 0), Vector3(0, 0, 0)]
+}
+tracks/1/type = "value"
+tracks/1/imported = false
+tracks/1/enabled = true
+tracks/1/path = NodePath("Camera:position")
+tracks/1/interp = 1
+tracks/1/loop_wrap = true
+tracks/1/keys = {
+"times": PackedFloat32Array(0, 0.5, 1.5),
+"transitions": PackedFloat32Array(1, 1, 1),
+"update": 0,
+"values": [Vector3(0, 0, 0), Vector3(0, -0.1, 0), Vector3(0, 0, 0)]
+}
+
 [sub_resource type="AnimationLibrary" id="AnimationLibrary_qeg5r"]
 _data = {
 "RESET": SubResource("Animation_fvvjq"),
 "jump": SubResource("Animation_s07ye"),
+"land_center": SubResource("Animation_3eyjl"),
 "land_left": SubResource("Animation_l1rph"),
 "land_right": SubResource("Animation_vsknp")
 }
@@ -385,6 +381,7 @@ MarginContainer/constants/margin_top = 10
 [sub_resource type="SphereShape3D" id="SphereShape3D_k4wwl"]
 
 [node name="Character" type="CharacterBody3D" node_paths=PackedStringArray("HEAD", "CAMERA", "HEADBOB_ANIMATION", "JUMP_ANIMATION", "CROUCH_ANIMATION", "COLLISION_MESH")]
+transform = Transform3D(-4.37114e-08, 0, -1, 0, 1, 0, 1, 0, -4.37114e-08, 0, 0, 0)
 script = ExtResource("1_0t4e8")
 default_reticle = "res://addons/fpc/reticles/reticle_1.tscn"
 HEAD = NodePath("Head")
@@ -393,8 +390,6 @@ HEADBOB_ANIMATION = NodePath("Head/HeadbobAnimation")
 JUMP_ANIMATION = NodePath("Head/JumpAnimation")
 CROUCH_ANIMATION = NodePath("CrouchAnimation")
 COLLISION_MESH = NodePath("Collision")
-CROUCH = "crouch"
-SPRINT = "sprint"
 
 [node name="Mesh" type="MeshInstance3D" parent="."]
 transform = Transform3D(1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0)
@@ -413,7 +408,6 @@ libraries = {
 transform = Transform3D(1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1.5, 0)
 
 [node name="Camera" type="Camera3D" parent="Head"]
-transform = Transform3D(1, 0, 0, 0, 0.999391, -0.0348995, 0, 0.0348995, 0.999391, 0, 0, 0)
 
 [node name="HeadbobAnimation" type="AnimationPlayer" parent="Head"]
 libraries = {

project.godot

@@ -12,7 +12,7 @@ config_version=5
 
 config/name="first person controller 2.0"
 run/main_scene="res://test_world.tscn"
-config/features=PackedStringArray("4.2", "Forward Plus")
+config/features=PackedStringArray("4.3", "Forward Plus")
 config/icon="res://icon.svg"
 
 [display]
@@ -23,43 +23,43 @@ window/size/mode=2
 
 ui_left={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194319,"physical_keycode":0,"key_label":0,"unicode":0,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194319,"physical_keycode":0,"key_label":0,"unicode":0,"location":0,"echo":false,"script":null)
 , Object(InputEventJoypadButton,"resource_local_to_scene":false,"resource_name":"","device":0,"button_index":13,"pressure":0.0,"pressed":false,"script":null)
 , Object(InputEventJoypadMotion,"resource_local_to_scene":false,"resource_name":"","device":0,"axis":0,"axis_value":-1.0,"script":null)
-, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":65,"key_label":0,"unicode":97,"echo":false,"script":null)
+, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":65,"key_label":0,"unicode":97,"location":0,"echo":false,"script":null)
 ]
 }
 ui_right={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194321,"physical_keycode":0,"key_label":0,"unicode":0,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194321,"physical_keycode":0,"key_label":0,"unicode":0,"location":0,"echo":false,"script":null)
 , Object(InputEventJoypadButton,"resource_local_to_scene":false,"resource_name":"","device":0,"button_index":14,"pressure":0.0,"pressed":false,"script":null)
 , Object(InputEventJoypadMotion,"resource_local_to_scene":false,"resource_name":"","device":0,"axis":0,"axis_value":1.0,"script":null)
-, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":68,"key_label":0,"unicode":100,"echo":false,"script":null)
+, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":68,"key_label":0,"unicode":100,"location":0,"echo":false,"script":null)
 ]
 }
 ui_up={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194320,"physical_keycode":0,"key_label":0,"unicode":0,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194320,"physical_keycode":0,"key_label":0,"unicode":0,"location":0,"echo":false,"script":null)
 , Object(InputEventJoypadButton,"resource_local_to_scene":false,"resource_name":"","device":0,"button_index":11,"pressure":0.0,"pressed":false,"script":null)
 , Object(InputEventJoypadMotion,"resource_local_to_scene":false,"resource_name":"","device":0,"axis":1,"axis_value":-1.0,"script":null)
-, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":87,"key_label":0,"unicode":119,"echo":false,"script":null)
+, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":87,"key_label":0,"unicode":119,"location":0,"echo":false,"script":null)
 ]
 }
 ui_down={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194322,"physical_keycode":0,"key_label":0,"unicode":0,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":0,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":4194322,"physical_keycode":0,"key_label":0,"unicode":0,"location":0,"echo":false,"script":null)
 , Object(InputEventJoypadButton,"resource_local_to_scene":false,"resource_name":"","device":0,"button_index":12,"pressure":0.0,"pressed":false,"script":null)
 , Object(InputEventJoypadMotion,"resource_local_to_scene":false,"resource_name":"","device":0,"axis":1,"axis_value":1.0,"script":null)
-, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":83,"key_label":0,"unicode":115,"echo":false,"script":null)
+, Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":83,"key_label":0,"unicode":115,"location":0,"echo":false,"script":null)
 ]
 }
 crouch={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":67,"key_label":0,"unicode":99,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":67,"key_label":0,"unicode":99,"location":0,"echo":false,"script":null)
 ]
 }
 sprint={
 "deadzone": 0.5,
-"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":4194325,"key_label":0,"unicode":0,"echo":false,"script":null)
+"events": [Object(InputEventKey,"resource_local_to_scene":false,"resource_name":"","device":-1,"window_id":0,"alt_pressed":false,"shift_pressed":false,"ctrl_pressed":false,"meta_pressed":false,"pressed":false,"keycode":0,"physical_keycode":4194325,"key_label":0,"unicode":0,"location":0,"echo":false,"script":null)
 ]
 }

test_world.tscn

@@ -65,9 +65,6 @@ uv1_triplanar_sharpness = 0.000850145
 [node name="Character" parent="." instance=ExtResource("1_e18vq")]
 transform = Transform3D(1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0)
 
-[node name="Camera" parent="Character/Head" index="0"]
-transform = Transform3D(1, 0, 0, 0, 0.999391, -0.0348995, 0, 0.0348995, 0.999391, 0, 0, 0)
-
 [node name="WorldEnvironment" type="WorldEnvironment" parent="."]
 environment = SubResource("Environment_20rw3")
 
@@ -107,5 +104,3 @@ transform = Transform3D(1, 0, 0, 0, 1, 0, 0, 0, 1, -4.5, 3, -15.5)
 use_collision = true
 size = Vector3(19, 8, 1)
 material = SubResource("StandardMaterial3D_7j4uu")
-
-[editable path="Character"]